Editing Commodore Amiga Plipbox Ethernet Adapter
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.
The edit can be undone.
Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
| Latest revision | Your text | ||
| Line 1: | Line 1: | ||
| − | + | '''Amiga Ethernet / Internet Network Adapter. Plipbox for A500 A600 A1200 A1000 A2000 A3000 A4000''' | |
| − | |||
Add internet capability / Ethernet networking to your classic Commodore Amiga computer. | Add internet capability / Ethernet networking to your classic Commodore Amiga computer. | ||
| − | |||
(Not suitable for A1000 unless you are happy to make up an adapter to correct the pinout and gender). | (Not suitable for A1000 unless you are happy to make up an adapter to correct the pinout and gender). | ||
| − | |||
The Simulant Plipbox is a pre-made and assembled kit housed in a custom 3D printed case which allows you to get your Amiga online. It allows an Amiga to connect to an Ethernet network via the parallel port. | The Simulant Plipbox is a pre-made and assembled kit housed in a custom 3D printed case which allows you to get your Amiga online. It allows an Amiga to connect to an Ethernet network via the parallel port. | ||
| − | |||
This means the internet and web browsing can be used as well as Networking Amiga computers with SAMBA to other computers such as Windows, Mac, Linux or even other Amigas. | This means the internet and web browsing can be used as well as Networking Amiga computers with SAMBA to other computers such as Windows, Mac, Linux or even other Amigas. | ||
| − | |||
Works with standard classic Amigas and also supported by the Vampire accelerator cards with Coffin OS (Coffin OS even includes the Plipbox driver in its Internet Setup Wizard so it is completely plug and play!) | Works with standard classic Amigas and also supported by the Vampire accelerator cards with Coffin OS (Coffin OS even includes the Plipbox driver in its Internet Setup Wizard so it is completely plug and play!) | ||
| − | |||
Powered by a "Mini USB cable" using 5v. A standard phone charger USB plug can be used or USB port from the Amiga or other nearby computer. | Powered by a "Mini USB cable" using 5v. A standard phone charger USB plug can be used or USB port from the Amiga or other nearby computer. | ||
| − | |||
'''Usage Notes:''' | '''Usage Notes:''' | ||
1. Install plipbox.device driver in your Amiga "devs:network/" folder (if using Coffin OS with Amiga then ignore this step and run the internet setup wizard instead). | 1. Install plipbox.device driver in your Amiga "devs:network/" folder (if using Coffin OS with Amiga then ignore this step and run the internet setup wizard instead). | ||
| − | |||
2. After driver installation, always power on the Plipbox before powering on your Amiga (or at the same time). If the Plipbox is powered on after the Amiga then no internet connectivity will be found. | 2. After driver installation, always power on the Plipbox before powering on your Amiga (or at the same time). If the Plipbox is powered on after the Amiga then no internet connectivity will be found. | ||
| − | |||
3. Lastly you'll need a tcp/ip stack on your Amiga such as AmiTCP, Genesis, MiamiDx or Roadshow etc | 3. Lastly you'll need a tcp/ip stack on your Amiga such as AmiTCP, Genesis, MiamiDx or Roadshow etc | ||
The Simulant made Plipbox is based on Lallafa's "Plipbox" along with the Kuro68k PCB board. | The Simulant made Plipbox is based on Lallafa's "Plipbox" along with the Kuro68k PCB board. | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
