Difference between revisions of "Classic 68K Amiga SAMBA setup"

From Simulant
Jump to: navigation, search
(Basic Amiga 68K SAMBA setup steps)
Line 12: Line 12:
 
'''Prerequisites'''
 
'''Prerequisites'''
  
1. First add a Plipbox to your Amiga and have it setup with MiamiDX or similar TCP/IP stack so you have internet and Network connectivity available on the Amiga - see instructions and information here: '''[[Commodore Amiga Plipbox Ethernet Adapter]]'''
+
1. First setup Samba on your NAS, PC or network so that you have a Samba server or host running ready to connect your Amiga to. Make sure your local network IP range 192.168.1.* etc is allowed to connect so your Amiga will see the WORKGROUP and Samba Shares available on the local network.
  
2. Using your newly setup Plipbox download the following files from here: [http://wiki.simulant.uk/downloadable-files/amiga-68k-samba/ Amiga 68K Samba files] to your Amiga, or transfer them initially by other means you may already have.
+
2. Add a Plipbox to your Amiga and have it setup with MiamiDX or similar TCP/IP stack so you have internet and Network connectivity available on the Amiga - see instructions and information here: '''[[Commodore Amiga Plipbox Ethernet Adapter]]'''
 +
 
 +
3. Using your newly setup Plipbox download the following files from here: [http://wiki.simulant.uk/downloadable-files/amiga-68k-samba/ Amiga 68K Samba files] to your Amiga, or transfer them initially by other means you may already have.
  
 
You now should have these in a folder on your Amiga:
 
You now should have these in a folder on your Amiga:
Line 29: Line 31:
 
'''Setting Up Samba'''
 
'''Setting Up Samba'''
  
Step 1 - Find the Samba 2.2.5 Archive (Samba-base.lha) and unarchive it to RAM:
+
Step A - Find the Samba 2.2.5 Archive (Samba-base.lha) and unarchive it to RAM:
  
Step 2 - Find the Samba 2.2.5 Binary (Samba-bin-68k.lha) and unarchive it to RAM:
+
Step B - Find the Samba 2.2.5 Binary (Samba-bin-68k.lha) and unarchive it to RAM:
 
(this file contains all the 68k specific binaries for use in this installation)
 
(this file contains all the 68k specific binaries for use in this installation)
  
Step 3 - Find the smbfs-68k.lha file and unarchive it to RAM:
+
Step C - Find the smbfs-68k.lha file and unarchive it to RAM:
  
Step 3 - Open up your RAM disk, (double click) the drawer 'Samba-2.2.5' and rename the drawer within from being called 'install' to just be now called 'samba'
+
Step D - Open up your RAM disk, (double click) the drawer 'Samba-2.2.5' and rename the drawer within from being called 'install' to just be now called 'samba'
  
Step 4 - Back in your RAM disk, there should be another drawer just called 'install', you can open this and drag the contents into the new 'samba' drawer within 'Samba-2.2.5'
+
Step E - Back in your RAM disk, there should be another drawer just called 'install', you can open this and drag the contents into the new 'samba' drawer within 'Samba-2.2.5'
  
Step 4 - Now also in RAM, open the drawer called 'smbfs-1.74-68k' and drag the 'smbfs' file also into your new 'samba' drawer that is within 'Samba-2.2.5'.
+
Step F - Now also in RAM, open the drawer called 'smbfs-1.74-68k' and drag the 'smbfs' file also into your new 'samba' drawer that is within 'Samba-2.2.5'.
  
 
You should end up with a 'samba' drawer with contents like this:
 
You should end up with a 'samba' drawer with contents like this:

Revision as of 11:06, 18 May 2020

SAMBA networking is very useful for Amiga computers, as it allows a fast and convenient way to transfer large files, games or software to your classic Commodore Amiga.

A standard Amiga computer is limited to 880K floppy disk capacity unless you have a CD-ROM drive or other means to transfer files (and burning lots of CDs can be time consuming and wasteful on media).

One option is a direct link via a serial or parallel cable from the Amiga to another PC, or even to use a telnet BBS service to upload and download files - these options can be slow and fiddly to implement.

With SAMBA however, transferring files to your Amiga is as easy as opening up a Drawer in Workbench and dragging them to your Hard DIsk Drive or Compact Flash card - and everything can be done directly on the Amiga without having to use UAE etc!


Basic Amiga 68K SAMBA setup steps

Prerequisites

1. First setup Samba on your NAS, PC or network so that you have a Samba server or host running ready to connect your Amiga to. Make sure your local network IP range 192.168.1.* etc is allowed to connect so your Amiga will see the WORKGROUP and Samba Shares available on the local network.

2. Add a Plipbox to your Amiga and have it setup with MiamiDX or similar TCP/IP stack so you have internet and Network connectivity available on the Amiga - see instructions and information here: Commodore Amiga Plipbox Ethernet Adapter

3. Using your newly setup Plipbox download the following files from here: Amiga 68K Samba files to your Amiga, or transfer them initially by other means you may already have.

You now should have these in a folder on your Amiga:

SMBMounter.lha

samba-2.2.5-base.lha

samba-2.2.5-bin-2.3-68k.lha

smbfs-68k.lha


Setting Up Samba

Step A - Find the Samba 2.2.5 Archive (Samba-base.lha) and unarchive it to RAM:

Step B - Find the Samba 2.2.5 Binary (Samba-bin-68k.lha) and unarchive it to RAM: (this file contains all the 68k specific binaries for use in this installation)

Step C - Find the smbfs-68k.lha file and unarchive it to RAM:

Step D - Open up your RAM disk, (double click) the drawer 'Samba-2.2.5' and rename the drawer within from being called 'install' to just be now called 'samba'

Step E - Back in your RAM disk, there should be another drawer just called 'install', you can open this and drag the contents into the new 'samba' drawer within 'Samba-2.2.5'

Step F - Now also in RAM, open the drawer called 'smbfs-1.74-68k' and drag the 'smbfs' file also into your new 'samba' drawer that is within 'Samba-2.2.5'.

You should end up with a 'samba' drawer with contents like this: